Pulsar NS series light shield mounting bracket

Per the limitations section in the installation instructions for the Pulsar NS series lights (P/N 11-1080-B and 11-1080-C) if the light is not at least 1.5 inches below the top of the wing, 1.5 inches above the bottom of the wing, and 3 inches aft of the leading edge, an alternate mounting bracket (P/N 01-1089) which incorporates a light shield for blocking cross-side visibility of the red and green position lights.   This is required to ensure that installations that don’t meet this limitation comply fully with the TSO Minimum Performance Standards when installed on an aircraft.

If your particular mounting location does not meet the limitation as specified, please notify AeroLEDs LLC so that a set of the 01-1089 mounting brackets with the light shield can be provided for your installation.

Shielded Mount